COMPONENTS |
|
Standard components: |
- 1 x D43- P7 Digital Concealed 2 mode LED-lamp assembly 3.7V-6.0V |
- 1 x P7-E2 Bezel |
- 1 x E2 Body |
- 1 x LRB-168A li-ion battery . |
- 1 x 6A- tactical button switch tailcap with lanyard |
- 1 x CH-02 AC charger, 3 hours charging (max) |
- 1 X gift box |
|
Optional: |
- P7-E2 holster |
- DH-02 AC charger, 3 hours charging (max) |
|
Please note that P7-E2 bezel is compatible with wolf-eyes E2 series flashlights. |
|
FEATURE |
|
- Features a Seoul Semiconductors SSC P7 LED Emitter |
- Up to 580 lumens of brightness when powered by 1 x LRB168A battery |
- 2 modes function: |
Default mode: Maximum brightness (100%) -> 30% brightness ->lowest brightness (2%) |
Concealed mode: Strobe -> SOS-> Beacon signal |
- P7-E2 bezel is compatible with wolf-eyes Eagle2 series flashlight |
- Aerospace-grade Aluminum body, HA III Military grade hardanodized in black |
- Lanyard attached and candle function, it can stand up on a flat surface as a candle |
- Waterproof: IPX-8 standard |
|
SPECIFICATIONS |
|
Brightness:580Lumens (full brightness stage) |
Runtime: full brightness stage: 1 hour with regulated output ; 2 hours with unregulated output. |
Body:Aerospace grade aluminum construction. |
Reflector: High temperature processed, layers of alloy coating films. |
Finish: HA III Military grade |
Lamp: SSC P7 LED Lamp Assembly 3.7-6.0V. |
Switch: Rapid switch between Morse-on and lock-on with over 50,000 times life cycle. |
O-ring sealed:Splash proof. |
Beam: flood beam with good combination of throw |
Weight without battery: 195g |
Length: 151.50mm |
Body diameter: 25.4mm |
Head diameter: 47mm |
Operation Temperature: -25°C-60°C |
Color: Tactical black |
Package: gift box |
|
Digital LED instruction: |
Soft press till the light comes on 100%, then further pressing the switch will activate default mode functions, according to the sequence of "maximum brightness (100% brightness) -> 30% brightness -> 2% brightness". When you have reached the desired level, press the switch fully to keep the light on at that level. |
When switch on/off for 7 times in Default mode, the light will turn into concealed mode, according to the sequence of "Strobe -> SOS-> Beacon signal". |
After switched off the flashlight for 2 seconds, the default settings resume, and the lamp will enter full brightness when being switched on again. |
|
Photos:
|
|