Tube tester for LED and neon tube T6188

• Voltage: Approx.3KV
• Test Frequency:Approx.280Hz
• Field Strength: Approx.10uV/m
• Test Current: <7uA
• Voltage Indication: LED light and Neon Tube
• Dimension: 128*60*36mm
• Weight: Appro x 0.3g

Features:

Handy test instrument for swift fault finging in all gas-filled low pressure and high pressure diacharge lamps.

For fluorescent lamps the test is carried out without disassembling the lamps.

Buit-in continuity tester for chokes,coils,wires,filament,etc.with LED display.

LED display for continuity.

· Put filament in socket

Check filament, The LED light means the filament is good,otherwise is broken inside.If you cannot fit the socket, then you can using the rod.

Touch lamp on

You only need Touch the filament

Using the aerial touch the filament will light the whole lamps

d touch any lamps with the aerial or metal part on top.