Super induction lamp induction lighting - EL-0088

For LVD induction lamp LVD induction light, it is very easy to install like CFL with E27/E40 base. You can light them in any direct in your home,shop,school,ect. For round and rectangular shape,when you wired them together with your fixture, please notice as following:

1. Please confirm good connection between tube and ballast firstly,and then make the L side and N side of ballast connect with power. So, it can avoid load open to be charged.

2. The watt of tube and ballast must be consistent. Do not make mistake.

3. Green and yellow line is the groinding line, it must be connected with ground and lamp shade.

4. For the fixture reflector, you’d better to use mirror material and must have some spare room for tube, tube and the side of reflector need70~90mmdistance, at least 40mm from bottom of reflector.

5. For all kinds of different fixtures matched with induction lamp, you must pay attention the heat dispersion. The better heat dispersion, the longer lifespan for induction lamp. The temperature inside the ballast house tried to keep before 50 centidegree. The farther between ballast and heat source, the better.

6. Solar system, 12VDC or 24VDC, take care that control system should have certain function of anti-interference.

7. For dimming function induction lamp, it will be the same installation way if you choose automatic model; if you chosed hand control model, we will give you special instruction paper .Do not worry. Easy to follow.

1,Super long life:100,000 hours 2,5 years warranty,maintainence free

3,High power factor >0.99 4,High energy efficient

5,Excellent CRI>85 6,Light power efficacy 80lm/watt

7,Working frequency: 230 khz

8,The temperature of the tube no higher than 100°C

9,Lumen maintenance rate: 2000hrs at 95%

10,No glare, no flicker soft light, eye sight protection

11, Easy installation with E27 or E40 lamp base

12,Amalgam < 5mg, greatly lower than FL

13,Level of harmonic content, environment friendly

14,Unique patented-chip technology, instant start up, workable under -35°C 15,Electronic ballast with open or short circuit protection

Largely applying in workshop, hall, square, highway, big marketplace and so on project lighting, especially for factory, school, exhibition shop, station, port, airport, tunnel, made the real energy-saving.Also, for some small watt with DC voltage item, it is best choice to use in solar system.Together with street fixture, better choice thanLED stree tlight.For unit value of induction lamp are very high, we are very care of the package for each lamp.All of our products were packed by custom foam box or other safe package and standard exporting cartons with professional fragile label.We deliveried abroad many pieces. So far, nobody found fragile. But, really,When you received our package, if you found the outer cartons are broken, please state to the courier and also hear the sound from the cartons.If it is clear to hear the glass fragile, please reject sign and we will send your new one again.Sometime, if our package foam are not enough for some item, we will pack with other different ways in order to make you got the products asap. But, we make sure satety to arrive. Hope you can understand.

All items will be shipped to buyer's address.Before you pay, please make sure your detail address,contact person and phone.Notice:

In order to make sure quick and very safe arriving, all of our lamps will consider to use by sea or aircargo and express Although you will think the ship cost is high a little, it is very direct flight and very safe transport. We do not hope to make client trouble because of bad transport with cheap fee.If you need to ship with other courier , you can ask us to change the price for you specially.

We can show you the CE,ROHS, UL,ISO9001 Certificate for you if you needed.For normal models like self-ballast, 18w~400w Round or rectangular shape, we hadlarge stocksfor your quick delivery. LVD induction Lamp Usage Cost Comparison

Energy and Related Cost Savings:

ADVANTAGES OF INDUCTION LAMPS

Power Consumption – Energy savings can extremely impact operation costs. Savings can be delivered through the installation of new efficient Induction Lamp technologies which consume only 50% +/- of what the conventional lighting system consumes. All existing lamps and fixtures should be considered for replacement, retrofit or upgrade to maximize energy savings.

Lifetime – Durable Induction Lamps last 5 to 10 times longer than conventional light sources and exceed 100,000 hours of rated lifetime (that is over 22 years of 12 hours of ignition per day). Thus the re-lamping costs can be cut it to a fraction of what is currently being spent on maintenance costs or virtually eliminated. Those costs also apply to purchasing administration, logistics, warehousing, disposal etc.

Maintenance – The cost occurring during temporary suspension of operation because of lighting system maintenance will not be simple to calculate. The over head costs related with maintenance include costs of salary, training, logistics and insurance could be calculable. Other costs if you are currently contracting out the maintenance include the cost of changing out ballasts and lamps when needed, especially in those hard to reach locations. However, the total maintenance costs will often exceed energy savings. Induction Lamps can help users minimize maintenance costs in terms of its longer lifetime.

Wearing Parts – Electrode-less design of Induction Lamps can completely avoid the damage of delicate components such as filaments or electrodes that are the primary causes of lamp failure in conventional light sources including HID, Halogen, Incandescent and Fluorescent lamps. Replacement for induction Lamps is therefore not required at all after vibration, accidental collision or weather storms and long time of ignition as well.

Heat – Less heat generating from Induction Lamps can reduce a lot of cost including lighting fixture maintenance costs and HVAC operation costs from ambient inefficient heat loss.

Color Perceived – Good color rendering index (CRI) is crucial to visibility, safety and comfort. Induction Lamps having a natural color of light can illuminate much better than most conventional light sources. Because light color can greatly change appearance, aesthetics and attractive qualities color options should be an important factor when considering and evaluating light quality.

Hot Strike – Induction Lamps have good performance of instant re-strike without warming up which will ensure that there isn’t any additional utility costs from temporary suspensions of power supply. This all will ensure safety and security for those applications where instant re-strike is required.

Cold Ignition – Induction Lamps can be ignited even under much colder circumstances with temperatures lowering to -40 degrees C/-20 degrees F, thus being a preferable light source for cold storages and outdoor lighting applications in cold areas.

Flicker and Glare - Without flicker and glare Induction Lamps can dramatically improve productivity, readability, eyesight and headaches when comparing with conventional light sources including HID and Fluorescent Lamps that generate much flicker.

Noise- With a very quiet and silent design Induction Lamps can make users comfortable without a humming or buzzing.

Environmentally Safe – In Terms of higher energy efficiency Induction Lamps can be adapted to promote energy saving policies and utilize the many Utility Saving Rebate Programs that are available.

EMC – Induction Lamps are the best Lighting Products available for business’s when completing a lighting project, since it can bring customers many benefits and a very high ROI with less than 3 years. Induction Lamps are an exceptional cost –effective lighting solution that can replace the

conventional lights sources.

Induction Lamps Usage Cost Comparison

Energy and Related Cost Savings: