solara garden light/solar wall light with motion sensor - SN-W1001

1.Solar panel:0.55W

2.Lithium battery:3.7V/950mA

3.LED:1W power,16pcs, 5500-6000K colour temperature,Lumen240-400LM lumen.
4.Material:New environmental and protection fire level PC,T6061 Aluminum surface anode sandblasting

5.Light control sensor:Autt-light at night

6.Work Model:Light control + Infrared human sensor,sensor time last 30second.

7.Charge time:>8 hours(1000W/m2 Illumination standard)

8.Work time:Full charged, each night works 50 times, can continuously work one week, no worry about the rainy day.

9.Size:132mm*92mm*77mm

10.N.W:0.2KG

11.Senor distance:1-2M

REMARK.

1.Sensing distance will be affected by the ambient temperature, the product induction principle is sensing the human body temperature, so ambient temperature near or above body temperature ,sensing distance will be nearer, ambient temperature lower than body temperature, sensing distance will be farther, the higher of the temperature, the closer of the sensing distance ; the lower of the temperature, the further of the sensing distance (Measured high temperature environment sensing distance will be less than one meter, low temperature sensing distance will be greater than 2 meters), so be sure to consider this factor when purchasing.
2 Product need to be installed in the place which can be as much sun light as possible, the longer the exposure time, the higher the charging efficiency, and vice versa, the shorter.
3. Different sunshine intensity will affect the charging efficiency, so the same charging time is also lead to the different of working time.