Outdoor IP67 6*3w warm white 3000k led inground lights 24vDC - IN2E36

Waterproof IP67 24vDC 6*3w inground light

The Inground lights adpots High power LED as the light sourse, there are many advantages when compare to the normal inground light, such as low energy-saving, environment protection, high brightness, anti-shork, anti-vibration, purity color, and long lifespan, about 50,000 hours.

6*3W product feature

a, LED source: high power LED 3w
b,Input voltage: 24V DC
c,Consumption: 18W
d,LED beam angle: 25 and 45 degrees
e.LED quantity: 6 * 3W
f,Color temperature: 5,000 to 6,000K
g,Material: stainless steel trim + Housing: die-cast aluminum
h,Protection: IP67
I.Working temperature: -30 degree Celsius

Technical Parameter

Application

With IP67 rank and-20°C~45°C working temperature,the inground lights can adapt to a variety of indoor and outdoor temperature, humidity difference. They can be widely used in decoration of the buildings, stage, ancient buildings, shopping malls, hotel, cultural place and so on.

The Connection way

The Single Color LED In-ground Lights also adopts bus connection way, it turns to bright when power on.

The length of The lamp between the power supply , The length of the lamp between the lamp should not be more than 3meter.

The total length of the T wire should not be over 100meter.

Installation Guide

1.Make sure the power supply of housing to connect ground;

2.The power and signal output wire of the last light in each loop connected waterproof cap;

3.Make sure the controller and power supply to work in ventilated, dry environment;

4.Please make sure no short-circuit before using, or the components may be burned

Attention

1. Power must be off before installing or removing;

2. Please replaced by new one when light body is damaged;

Application case

Our Company