New Archon W40vr 4 Color LED Underwater Photography Lamps Diving Torches

New Archon W40vr 4 Color LED Underwater Photography Lamps Diving Torches

ARCHON W40VR is multi-functional diving photographing light with white, red, purple and UV high-power LED. With brightness of 2600 lumens, light angle of 120°and max run-time over 5 hours, this professional video light can be used in various underwater environment.

Basic Information:

(1)Model NO.:W38VR

IP Rating:IP68

Certification:CCC, CE, FCC, RoHS, CE, RoHS, SGS and Ipx8

Emitting Color:White/red/purple/UV

Application:Professional Diving ,Underwater 100m

Model:2600 Lm New Video/Photo light

LED:CREE Xm-L U2 LED*10

Switch 1:red light-purple light- UV light-OFF
Switch 2:white light-high-low-SOS-OFF

Battery:32650 Li- Ion Battery *1

Operation Voltage:2.8V to 4.5V

Waterproof:100 Meters Underwater

Waterproof Standard:Waterproof 100m Underwater

Export Markets:Global

(2)Brightness:White light:2600lumens

Red light:200lumens
Purple light:6W
UV light:6W

(3)Bulb: White CREE XM-L U2 LED *4 (max 2600 Lumens);

Red CREE XP-E N3 LED*2 (620nm)

Purple light x 2 wave length:410nm

UV x 2 length:365nm

Specification:

1.Model: New Archon W40vr 4 Color LED Underwater Photography Light Diving Torches

2. Bulb: White CREE XM-L U2 LED *4 (max 2600 Lumens); Red CREE XP-E N3 LED*2 (620nm)

Purple light x 2 wave length:410nm UV x 2 length:365nm

3.Color temperature: White LED: 5000k-5500k

4. Brightness:White light:2600lumens

Red light:200lumens
Purple light:6W
UV light:6W

5.Runtime: White: 1.2 Hour,Red/Violet/UV:5 Hours
6.Reflector: no hotspot design, no reflector
7.Lens: 4mm Polycarbonate Board.
8.Body material: Durable aircraft-grade aluminum.
9.Angle of light beam: 120°
10.Surface treatment: Premium Type III hard-anodizing.
11.Color: Black
12.Battery: 32650 Li- ion battery *1.
With battery over-discharging protection, polarity reversing protection
13.Operation voltage: 2.8V to 4.5V.
14.Waterproof: 100 meters underwater
15.Dimensions: 124.8mm (length)*50mm (dia. of head).
16.Impact resistance: 1.5M.
17.Weight:345 grams (without battery) 483 grams (with battery)
18.Underwater Weight: 220 grams (with battery)
19.Switch mode:
Switch 1:red light-purple light- UV light-OFF
Switch 2:white light-high-low-SOS-OFF
The two switches can be operated separately or simultaneously

FAQ

1. I do not use these high-end and multi-function flashlights a lot, what should I pay attention to in use?

.Battery

a. Battery type. Please use the specified battery type according to your flashlight user manual,and if you use rechargeable batteries,please use those with protected circuit.

b.Battery replacement to ensure performance of the flashlight and safety,please replace with same brand,same type and same capacity batteries and make sure to insert

batteries correctly with the positive end pointing to the light assembly.

c.Please take out batteries before long time storage to avoid battery leakage which may damage the flashlight components and part.

.Waterproof O-ring and lubricant

a.Right amount of lubricant will be applied on the flashlight o-rings before shipping out in order to ensure smooth operation and extend the lifetime of the o-rings and for

better waterproof as well.When there is little or no lubricant on the o-rings and it's difficult to twist between threads,please apply lubricant on the o-rings in time.

b.The o-rings can be worn out due to ling time use,please replace with spare o-rings attached in the package.

.Max Output

When the light is at Max mode,there is heat coming from battery discharge,drive circuit and LED,the flashlight head will be comparatively hot,please be cautious of touching it;

To protect the battery,circuit and LED so as to extend the lifetime of the flashlight,we do not recommend that you run the light at max mode continuously for more than ten minutes.

2.I could not turn on the light normally or it flickers,how to deal with this?
a.Check your battery:If the light can not be turned on it flickers,please check and see if the battery is used up and replace with a new one.

b.Clean the contact end and electricity conducting surface:If the light still can not be turned on after replacing a new battery,please check if there is dust on the positive or

negative end,or on the electricity conducting surface,if so,please use a clean cloth to clean the surface.

c.If neither of the above solutions works,please contact your dealer and follow the warranty procedure to repair/replace your light.