Magnalight EPL-24-96 Explosion Proof Fluorescent Light Fixture 2 foot 4 lamp - Class 1 Division 1 Fluorescent Light - EPL-24-96

2 foot 4 lamp Fluorescent Explosion Proof/Flameproof Light Fixture rated for paint spray booths, oil rigs, hazardous locations - details see: https://www.lightinghere.com/magnalight-epl-24-96-explosion-proof-fluorescent-light-fixture-2-foot-4-lamp-class-1-division-1-fluorescent-light-10032231
Item Type: Explosion-proof LightsLight Source: FluorescentInput Voltage(V): 120-277V ACLamp Power(W): 96
Lamp Luminous Flux(lm): 8000Lamp Luminous Efficiency(lm/w): 83Working Temperature(℃): 30 - 70Working Lifetime(Hour): 20000
Certification: ULPlace of Origin: Texas United StatesBrand Name: MagnalightModel Number: EPL-24-96
Lamp Options:: 20,000+ Hours Fluorescent Tube LampsDimensions:: W-11.25" L-27.5" H-8.5 "Weight:: 55 LbsTotal Watts:: 96 watts
Lumens:: 8000Voltage:: Universal 120-277VAC 50/60 hzOperating Temp Range: -30 C to 70 C - T6 RatedBeam Angle:: 150 degrees
Mounting:: Surface Standard - Pendant OptionalWiring Hub:: 1/2 inch threaded  
Magnalight EPL-24-96 Explosion Proof Fluorescent Light Fixture 2 foot 4 lamp - Class 1 Division 1 Fluorescent Light
contact supplier for Magnalight EPL-24-96 Explosion Proof Fluorescent Light Fixture 2 foot 4 lamp - Class 1 Division 1 Fluorescent Light


Made in the USA

The Larson Electronics EPL-24-96 Low Profile Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1, Class 2 Division 1 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.


The EPL-24-96 fixture is a 2 foot long, 4 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light and an ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes equipped with four F24-T5/HO lamps inside the traditional two foot two lamp housing. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is U.L. approved for use in paint spray booths.

The EPL-24-96 provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.

Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).

Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fluorescent light.

Made in USA QualityLamp Options

1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.

F24-T5HO – 2000 lumens per bulb (4000 lumens total), 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98



Note: The EPL-24-96 is only available with T5HO lamps. If you require different lamp options, please see our EPL-24-2L for fluorescent lamps or our EPL-24-2L-LED for fluorescent style LED lamps.










Specifications / Additional Information
EPL-24-96 Explosion ProofU.L. Ratings
UL Listing: United States - CanadaClass 1 Division 1, Groups C and D
Dimensions: W-11.25" L-27.5" H-8.5 "Class 1 Division 2, Group A,B,C,D
Weight: 55 LbsClass II Division 1- 2, Groups E,F,G
Total Watts:96 wattsUL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hzUL 1598 Marine Type
Total Lumens:8000UL 595 Outdoor Marine Type (Saltwater)
Lamp Life Expectancy:20,000 HoursUL listed for Paint Spray Booths
Efficiency: 83.30 Lumens per WattCalifornia Title 24 Compliant
Minimum Operating Temp:-30 C
Beam Angle: N/ASpecial Orders- Requirements
Color Temp: 4100K-Contact us for special requirements
Mounting: Bracket Standard - Pendant Optional
Wiring Hub: 1/2 inch threaded
U.L Approval: U.S Certificate Canada Certificate
Ambient Operating Temp -30 C to 70 C
Operating Temp Rating: -T6 Rated
Maximum Case Temp: 90 C
Packaging Detail:Pallet Freight
Delivery Detail:Varies - Depends on Location

Related Product for Magnalight EPL-24-96 Explosion Proof Fluorescent Light Fixture 2 foot 4 lamp - Class 1 Division 1 Fluorescent Light