LED Emergency Light with solar charge and USB interface - KM-7606

LED emergenyc light with solar charge function and USB interface KM-7606

Product characteristics:

1. Lead-acid battery rechargeable and free maintenance, with 4000mAH capacity high; Long service life, can be charged circularly 500 times above;

2. Use wide Voltage efficient power supply ,built-in automatic overcharge and over discharge protection circuit;

3. Use environmental protection import LED, super brightness and white, it can work more than 1000,00 hours; Low power consumption, with 49 LED lamps, can work 8 hours above when lighting intensity reach the highest brightness;

4. Built-in chip control circuit MCU touch and stepless brightness adjustment, adjustable light levels, a wide range of brightness options, simple operation; "DC" file can lighting also comes with emergency lights, a variety of functions choose according to the environment requirement;

5. Novel appearance of products, lamp holder adopt folding, is flexible and convenient, can adjust lamp lighting direction freely.

6. With hand shank and hook, easy to carry; It has emergency function, is the best spare lamps for outdoor recreation, field work, family and market.

7. Products with energy saving, environmentally friendly solar energy and power adapter, DC power input port, and built the polarity protection function;

8. Product comes with a USB output, product compatibility, can meet all kinds of digital electronic products, such as brand mobile phones (Apple, Nokia, Samsung, Motorola, LG, Sony Ericsson, etc.), ipad, MP3, PDA, MP4, MP5, game consoles and other products such as charge, discharge, run-time, depending on the different brands on the market, models and modes of operation.

Directions for use:

1. When charging, first horoscopes round end of the AC power cord into the product charging stand, then plug one end directly insert AC110-240V/50-60Hz power outlet, the corresponding charge indicator bright, adequate electricity needs for about 10 hours.

2. When using the solar to charge, the solar panel output voltage: ≥ 7V, output current: 0.5A, Adequate electricity needs about 8 hours;

3. Products, such as a power adapter (charger) charging adapter (charger) output voltage: 6V Output Operating Current: 0.5A., Adequate electricity needs 8 hours;

4. When the power switch is in the "OFF" position, only to charge the battery; touch, emergency, USB output function, are off;

5. When the switch is in the "/USB " file location, the touch switch is turned, while the USB port in the (output) state, non-emergency functions;

Open the lighting of two ways:

Way 1: touch the touch bit, the light brights; touch the touch bit again, the light is off.

Way 2: Press touch bit light levels gradually reduce light levels to achieve minimum brightness light brightness parked in the release corresponds to the brightness of the moment; then press and the touch bit light levels gradually increase light levels when released and the maximum brightness does not change, the lighting brightness stopping in Loosen moment corresponds to the brightness when released.

6. When the power switch in the DC file location, LED directly light, when external power input (charging), LED lights stop lighting, the external power supply to charge the battery only; but the product also has emergency function, when a sudden power failure ,LED illuminated immediately.

7. When using the USB function, the corresponding USB power cord is inserted into the USB socket of this product, and the other end into the charging digital products, pull the switch to the "/USB " stalls, the USB port is in working condition (output); To USB (output) charging function is turned off, pull the switch to the OFF position.

8. When the products need different angles light, please rotate the angle of the lamp to achieve.

Cautions:

1. For service life of the battery, please stop using and charge it promptly when Product electricity is obviously insufficient, and the ray of the light is becoming dim obviously;

2. Do not shine eyes directly to avoid affecting eyesight. (Child should be guided under adults);

3. The longest charging time can not surpass 20 hours (No exception for using the emergency function )

4. Please do not use it when charging So as not to burn out the power supply, power supply, internal components, external electronic products;

5. Products when not in use, the power switch to "OFF" position; Please charge it every two months when it has not used for a long time.

6. Lamp in need of rotation, without application of excessive speed continuous rotation in order to avoid the plastic friction damage to the product.

7. Please follow the instructions requirements, do not take apart the product freely, the company does not assume any responsibility because of negative consequences stemming from illegal operations.