led emergency light with remote control - YD-624

Portable.It is easy to carry anywhere. There is a wide applied range for your reference. Battery should be charged directly when the rechargeable torch is connected with the AC power. Economical and convenient solid state voltage regulator is used to prevent over charging and to extend battery life.

1.Powered by High Lumen Super Long Range LED. There are three kinds of LED lights for your choice. One is straw head beads, one is 5050 SMD LED, and the third one is the LED with 1W.

2.High speed charging capacitor can fully charge the built-in rechargeable battery in 8 to 10 hours.

3.Built-in high capacity rechargeable lead-acid battery, which can be charged more than 250 times. The Rechargeable LED module works on both Standard AC Power and also on built-in Rechargeable battery(DC Power).

4.The LED is probably the most powerful light source for everyday lighting needs.

5.Use the latest LED light engine technology so that over 95% luminary efficiency can be realized.

6.No Ultraviolet or Infrared Emission & Constant Invariable Light Output.

7.Easy installation. Perfect for Household use.

This rechargeable torch works in two ways.

1) Used as a regular bulb (energy saver) or and electric torch by hand carried.

2) Used as a emergency light. The rechargeable torch will automatically switch on when AC power goes off.

Applications:

of our LED light with common filament lampand Ordinary energy saving lamp

a. excellent quality ,competitive price, honest and warm service ect. LED Light

b. CE, ROHS and patent certifications.

c. Can be controlled by any remote of home appliance as your like

d. Energy saving, protecting environment and 50,000 hours lifespan

e. famous LED and chip as your like

f. Anti-burning plastic, good quality PCB.

Good quality: 1) we have professional engineers from Taiwan to design the products.

2) Our works are working more than 5 years in led light

3) At the same price, our materials are better than others.

4) can send samples soon for your comparing and confirming

Excellent Service: 1) Warm and honest service, make you home.

2) Warranty: 2 years

1. Just lighting when no power to save energy and give your light in time.

2. The indicator light will be red when charging, At this time , Please make sure it is on DC to save energy, it will not lighting, When AC, it is on. Otherwise. When power cut off, you can lighting it on AC . And DC as your like with remote or not.

3.. New ABS Plastic, E27 screw, (iron, aluminum, copper and son on as your like), ABS lampshade for anti-burning,

4. 800MAH storage battery, recharge 8-12 hours, discharge about two hours and half, So you can use it as emergency light and floodlight

As your need.

5. DC/OFF/AC, two-way switch: it will be light when the switch is on DC and AC. Meanwhile. It can also be on when the power cut off by controlled by remote.

6. Convenient remote has two kinds:

Single remote: You just can use the single remote in about 10 meters

Multi-function remote: you can use the other remote to control it, Such as the remote of air-condition, TV and the like expect ours.

7. Anti-fog, Used in and out of home. Such as house, hotel, camping,

Fisheries,Mine, factory, hospital and every place without electric.

8. Angle: 120 degrees

9. with stainless steel hanger

10. Angle: 120 degrees

Operation Instruction:

The middle of the switch on the light is OFF position, when you push the switch to AC, the lamp is always brightly lighting, and push it to right DC when power off, it will light.

LED(Light Emitting Diode) lasts practically for a life time and it burns for hundreds of hours with built-in high quality rechargeable battery. With a single time charge of 12 hours, you can leave it ON for several hours continuously.

Directions For USE:

1.To USE the LED lamp on Electric Power, plug the LED lamp into the standard 220V/110V AC socket, push the AC/DC button on the LED lamp towards the AC or DC position and then turn ON the main power. To turn ON/OFF the LED lamp, press the ON/OFF button on the remote or any home appliance remote control, such as TV, air conditioner, cooler, et. We call this Universal Remote Control.

2.To USE the LED lamp on the built-in rechargeable battery, either unplug the LED lamp from AC socket or turn OFF main power. Push the AC/DC button on the LED lamp towards DC position. To turn ON/OFF the LED lamp, press the ON/OFF button on the remote or any home appliance remote control, such as TV, Air Conditioner, Cooler, etc. We call this Universal Remote Control.

3.To charge the LED lamp, plug the LED lamp into Standard 220V/110V AC socket. Turn ON the main power and either push the AC/DC button on the LED lamp towards“OFF” position, or towards AC/DC position to use the remote control to turn off the rechargeable torch.

4.Avoid looking at the LED lights directly, as the beam is very strong and shining and harmful to eyes.

5.Charge the LED lamp once every month if the LED lamp is not used continuously for a month.