led canopy gas station lights,explosion proof led gas station lights - CES-J40~120-01H

gas station lighting fixture

Manufacture picture

CESPE 100W VS 400W HPS in Mexcio

Anti-Explosive Cert

Detail information (30w-120w) 100w as sample

Apply in America

1.Foreword

CESP LED Lighting Series, is the result after years of technology research and development.

CESP LED Public Lighting Series, include LED Street light Series, LED Tunnel Light Series, LED Gas Station Light Series, High Pole Light series

And with CESP LED Commercial lighting series (LED tube, LED bulb, LED Ceiling light…etc) form a complete set of lighting solution for a city lighting need (for school, hospital, , station (bus, train), factory, mall, garden…etc indoor and outdoor area.)

2.LED Tunnel Light, LED Gas Station Light, LED High Pole Light

CESP LED Tunnel Light, LED Gas Station Light, LED High Pole Light series is patented technology.

This product series are rated Anti-Explosive by government official certification body (CNEX), suitable for use in gas filled environment and enclose environment such as tunnel, weapon room...etc

3.Design:

It is designed to replace the current existing Lighting system in Tunnel, explosive environment, high pole...etc

Radiator is designed to be Curved Fin Shape to ensure easy flow of air. Surface of the Lamp fixture is sprayed with unique paint material. This material, not only assists in heat transmission to surrounding air, it also prevent dust and any other particle to accumulate or stay on the surface of the lamp fixture. Combined with the design of the radiator, this results in self clean fixture.During rain or melting process of snow and ice, will wash away the dust and other particles.

Lamp Body:

Japan Imported material: ADC12 Aluminum Alloy to form the whole lamp body

High pressure (1800ton) Die-Cast directly into lamp shape.

As a result of Die-Cast, no gaps hence, no space for dust to accumulate.

If dust and/or other particle cover the top of the lamp, this will create an isolation to the surrounding air, hence the heat will not be able to transmit effectively.

As a result, LED chip will get damaged due to overheat, and run at less efficient rate (light decay).

The previous slide mentions how we solve this issue.

LED chip with Aluminum PCB board installed directly onto Aluminum Shell. As a result, the whole lamp is integrated as a radiator for the LED chip.

4.Power Glass LED Chip PCB board Silicon:

Power Drive Capacitor: Japan imported, Rubycon

- To ensure long lasting power drive.

Glass: 4mm(thickness) Super Strengthening Glass with 95% light transmit rate.

- To ensure minimum initial light loss while maintaining protection.

LED Chip : USA bridgelux chip BXCB45 or Cree XPE. Performing at 140lm-150lm @ 350ma (350ma is slightly over 1 watts).

Aluminum PCB board : Thickness 2.0mm with heat transmission index of 2.0.

After research on thermal relation between LED and Aluminum, we choose to use 1 watt LED chip (350ma chip) for LED street light.

Multiple piece of 1 watts LED chip are mounted onto a 2.0mm Aluminum PCB board with enough distance apart, and then the PCB board is mounted directly to the aluminum housing, this is to ensure, every LED chip’s heat are being released with enough space.

The radiator surface area (LED mount area) are greater then 5 time the LED light emitting area.

Therefore, heat is being released in a timely fashion.

Water proof Silicon: Top quality rubber with anti-low aging and burn-proof characteristic.

Ingress Protection Grade : IP68 (highest protection grade for waterproof and dustproof).

This is achieved thru materials used and unique design of the water proof body.