HOT SALES 9PCS 10W RGBWA 5in1 battery powered wireless dmx led light - DM-L9P10-IR

HOT SALES 9PCS 10W RGBWA 5in1 battery powered wireless dmx led light with RF remote control

Available models:

wireless led uplighting specification:

Model: DM-L9P8-IR

1,Voltage: AC90-245V, 50-60HZ

2,IP Rate: IP44

3,Light source: 9*12W 4-IN-1 LEDs

4,LED life time: 100000 hours

5,High-effect environmental protection Lithium battery module, battery charging time: 6 hours

6,Battery working time: 8 hours

7,Net weight: 4kg uplighting led

8,Dimension: 30CM*11CM*25CM

9,Beam angle: 15°, 25°, 45°

wireless dmx led par uplighting , uplighting LED par light.

WIRELESS CONTROL
1,LED DISPLAY
2,126 frequency band without interference automatically selected to ensure communication reliability.
3,7 groups of ID codes are settable, the user can use seven groups of separated wireless networks in one place without any interference.
4,Communication distance Diameter: 500M (open area)
5,Working frequency: 2.4G ISM, 126 full-band
6,Maximum transmit power: 20dBm
7,Receiver sensitivity: -94dBm

Wireless led par uplighting light

ESTABLISHMENT OF COMMUNICATION:
1,The transceivers are electrified.
2, Press "frequency" to set the transceivers which are needed to be communicated to the same ID. If you want to use more than one group of wireless network in one place, the ID codes should be different for each network.
3,When the transceivers receive DMX signal they will select frequency without interference to send data and red LED will flash. The receivers will change the communication bands upward until it receives correct data with the same ID code and the green LED will flash, DMX data changed faster, the LED flash faster.
4,Then the communication will be established.

dmx wireless led par, uplighting led wireless.

INFRARED REMOTE CONTROL
1,Introduction for functions of buttons in remote controller. Useful functions will display in the LCD screen when you are using infrared remote control functions. Please see them below:

A,ON LIGHT ON
B,OFF LIGHT OFF
C,DMX512 It is a switch key, from infrared remote control switch to DMX512 control

D, > UP
E,JUMP Colorful Jump Change. Press “<” and “>” to adjust the speed for colorful jump change. 0 ----99, the bigger value means faster speed.

F,GCHANGE Gradual change. Bright→Dark, then Dark→Bright. Press “<” and “>” to adjust the speed for gradual change. 0 ----99, the bigger value means faster speed.
G,PUSE Pulse change. ON→OFF, then OFF→ON. Press “<” and “>” to adjust the speed for pulse change. 0 ----99, the bigger value means faster speed.
H,SOUND Sound activated mode. Press “<” and “>” to adjust the sensitivity for sound activated mode.99 is the highest sensitivity, 01 is the lowest sensitivity.
I, R Red cycle. Press “<” and “>” to adjust the brightness value for red color from 0----255, 255 is the highest brightness, 0 is the lowest brightness.
J, G Green cycle. Press “<” and “>” to adjust the brightness value for green color from 0----255, 255 is the highest brightness, 0 is the lowest brightness.
K, B Blue cycle. Press “<” and “>” to adjust the brightness value for blue color from 0----255, 255 is the highest brightness, 0 is the lowest brightness.
L, W White cycle. Press “<” and “>” to adjust the brightness value for white color from 0----255, 255 is the highest brightness, 0 is the lowest brightness.
M, Y Reserved for upgrade use

2, Effective transmitter distance of Infrared remote control is 8-15 meters, launch angle is 45 degrees.
When you are using the infrared remote control mode, one of the lights should be set as a master, and the rest of the lights should be set as slaves. Press the function key, when “Light Slave” is displayed on the LCD screen, press Enter key to save the slave mode.
When the master is set to Sound activated mode, the effect will be reflect much better. The master issues commands and the rest of the lights will follow the rhythm to ON and OFF and FLASH.
3, When you are using infrared remote control, the light will save functions which are being used automatically. When you turn on the lights after turn off, they will run the last remote control mode, you can choose other remote control mode according to your needs.
4, When you are using remote control mode, please use the remote controller to point to the receivers.
5, Remote Controller. up lighting led stage lighting.

LED par stage light, LED par lighting, wireless dmx led par, wireless led light, wireless led stage lighting, led par uplighting.

wireless led uplighting picture show

Packing details

Our exhibition

Our lighting projects

Trade terms

Our promises

1. Quick reply! Quick delivery! Efective solution!
2. Customers Satisfaction, provide good quality and best price and constant after sale service to be engaged in 100% of us.
3. With your wide requested of light with even less than our MOQ, we are able to fulfill most requests within short days of your order.

Customer Service

Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of light that is just right for your market. After the order, if you need any technical support, you can contact us any time. Thank you.

About us

Welcome to our website! We are Guangzhou Duomei Electronic Technology Co., Ltd. Our own factory located in China. We supply LED moving head lights, LED beam lights, LED par lights, LED effect lights etc... High quality procduct, reasonable prices, excellent customer service and a reliable credit standing is our tenet.

Thank you and hope we can cooperate in this business line!