Hot design touch remote controller - RF201

remote controller remote control switch led touch controller

working temperature: -20-60°C

supply voltage: DC5V-24V

output: 3 channels

connection mode: common anode

external dimension: L120ΧW62ΧH24mm

packing size: L185ΧW145ΧH52 mm

net weight: 226g

gross weight: 320g

static power consumption: <1W

output current: <8A (each channel)

output power: 12V:<288W, 24V:<576W

Touch Remote Control

working temperature: -20-60°C

power supply mode: AAA * 3

supply voltage: 1.5V * 3

transmission frequency: 2.4Ghz

standby power consumption: 0.015mW

standby current: 60uA

working current: 200uA

emission current: 10mA

remote distance: about 30m

standby time: 6 months

remote control weight: 94g

Summarization

2.4G controller is newly introduced wireless high-power LED controller of our company. It equips with touch remote control, touch remote control adopts high precision capacitance touch control technology, you can select the color you need by one button. It is convenient and easy. Each controller has a globally unique address code, in order to prevent confusion caused by controlling repeated address code. Each controller can be equipped with four remote controls, can achieve multiple controllers synchronization control. It is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass wall light etc. It has many advantages such as convenient to connect, easy to use and others. According to the actual need of customers, it can carry out jumpy changing, gradual changing, stroboflash and other effects of change.

1. Antenna: 2.4G remote control signal receiving antenna;

2. Function: on/off and mode key, long press the button, you can turn on/off the output of controller, short press the button, you can switch the mode;

3. Match: match code key, refer to 4 for use methods; clear code, in the process of using controller, if you no longer want to use the remote control that already code, then you can achive it by clearing code, methods of operation: controller is powered off, press and hold “Match” key, then power on, test it with remote control, if you could not control with the remote control, indicates the operation is successful, otherwise repeat this operation.

4. DIP: as shown in Figure 3. It is used for matching four groups of address codes of the controller.