High power 100w 400nm 405nm UV led - JX-UV-100W-400

High power 100w 400nm 405nm UV led

Advantages

1.Energy saving

Under same lighting effect, it can save more than 80% energy comparing to incandescent bulbs, and more than 50% to CFL lamps, also the incandescent bulbs’ and CFL bulbs’ maintenance cost and heat cooling cost by air-condition need much more at the meantime.

2. Environment friendly

Incandescent and CFL bulbs contain harmful substance. Once broken, these harmful substance will spread to the air, with bad effect to both human’s health and environment. While our LED bulbs never contain such things.

3.Long lifespan and no maintenance cost

Made by imported Epistar 5050SMD, high brightness 15-18Lm each piece with average life 50000hours, even the whole lamp’s working life is 40000hours, which is other lamps never reached .

4. Healthy light

Bulb’s light contains no UV, IR and radiation, so parents can bought this for children without any worry. Also protecting students’ eyes during study at night.

5.High efficiency

From test report you can get that our bulb’s light efficiency can reach 95%, while 80% incandescent bulb’s electricity changed to heat , only 20% changed to light.

Cautions

1)tatic Electricity

You need to take the protective measures for the product being sensitive to static electricity. It can lead to product damage or even the total invalid When the high voltage current made by static electricity is beyond the maximum rating. The ground resistance can't beyond 10ohm
By using anti-static-electricity bracelets/ cushions/ overalls/ shoes/gloves and anti-static-electricity containers, it can effectively prevent static electricity and surge.The soldering iron point should be properly grounded.
2)soldering

a, Use soldering by hand
Recommend using soldering iron which power is less than 20W and temperature is not higher than 300 °C. Soldering time is not more than three seconds each time.
b, Reflow soldering:
(a),Recommend setting according to the temperature curve of the right picture.
(b),After the soldering, the product temperature will drop to the room temperature, careful processing of products is necessary.
3)Cleaning

After the soldering, the cleaning need to made according to the following conditions
a,Cleaning agent:Isopropanol or industrial alcohol (>95 °)
b, Temperture limite: When the cleaning time is in the 30 seconds , the temperature can't higher than 50°C , if it is in the 3 minutes, the temperature can't higher than 30°C
c,Ultrasonic cleaning: MAX 300W
4)Others

a. Any time, don't touch colloid part, lest product surface come to be damaged or even invalid
b. The storage environment humidity should less than 50% and the temperature should be constant, which will lead to avoid the temperature changes not more than 20°C

Picture

Certification

Service

1.Your inquiry related to our products or prices will be replied in 24 hours.

2.Welltrained and experienced staffs to answer all your enquires in fluent English .

3.OEM&ODM, any your customized lightings we can help you to design and put into product.

4.Distributorship are offered for your unique design and some our current models .

5.Protection of your sales area,ideas of design and all your private information .

6.All the products must through 24 hours aging before delivery to ensure the quality again.