High Color Index and Luminance 40w-120w IP65 Induction Old Street Lights For Sale - DL-LD09E

High Color Index and Luminance 40w-120w IP65 Induction Old Street Lights For Sale

About us ofold street light for sale

We're named by Guangxi Doulight Equipmetns Co. Ltd., a national high-tech enterprise specialied in designing and producing eletrode-less lamps to which we're in possession of 3000 squares field bases and our products have acquired 6 national patents, all up to international standards by CE FCC RoHS

1.Products technical parameters of old street lights for sale

2. Technical data of lamp source of old street lights for sale

3. Product features of old street lights for sale

(1) Die-cast aluminum electrical box: electrostatic spray coating, corrosion resisting.

(2) The upper and lower parts of the lamp body are made of high quality high-pressure die-casting aluminum,

providing the highest class protection.

(3) Imported high-purity alumina made unibody reflector, providing the highest light efficiency..

(4) High-intensity, thermo stability curved 5mm toughened glass, glued down with the reflector by silica gel.

Dust proof & water proof.

(5) Electrostatic spray coating finish, using international RAL standard color, giving elegant appearance.

(6) The electric parts and the light source part are mounted separately, making a better heat dissipation.

(7)100 hours of professional aging test, stable performance. Greatly reduces maintenance cost.

(8) No flash, instant on, offering a better vision comfort level.

(9) Liquid mercury free: Not harmful to mankind and environment.

(10) Low harmonic content: meet the international L class standard.

(11) Adopt energy-saving electronic ballast to provide high power factor, low current, and reduce electric charge cost.

(12)Package case passed gravitational acceleration vibration test. The safety during transportation is strengthened.

4. Installation & maintenance of old street lights for sale

(1) Firsty, lamp-post should be prepared. All the parts and accessories of the lamp should be prepared beforehand too.

(2)Turn off the power before installation.

(3)Open the back shell of the light, connect the light’s power line and the wires from the lamp post-pipe. AC power 3-core wires should follow the instruction below: red line to the “L “ of the power, blue or black should be connected to the N of the power, yellow or green connected to the ⊥, DC power’s red line is for the positive of the power, black to the negative,

Attention: don’t connect positive to the wrong line.

(5) Loosen up the hexagon bolt on the cover plate of the lamp, put the lamp into the hole of the post pipe until it hits the stop. Adjust the angle of the lamp and the ground. ( using the enclosed wrench fasten the 4 hexagon bolts until it’s tightly fastened.)

(6) Mount the back shell back, fasten the bolts, done.

Remarks: 3*2.5m wires have enclosed when leaving the factory, 800mm in length. If there’re special requirements, please specify.

5.Packing details of old street lights for sale

1. Neutral Package

2. Package in carton with good inner supporting package with polyethylene bubble ;1pcs/ctn independent packing

3. Wooden packing if necessary

6.Application range of old street lights for sale

Application in outdoor environment such as arterial traffic, secondary main streets, blocks, parks, villa areas, express ways, etc..

7. DLLAMP old street light for salebulbAdvantages

1. Better light distribution in transverse space, light uniformity and soft.

2 Use high quality special designed magnetic core material for induction lamp, low heat consumption, lower energy loss, stable performance, with better applicability and uniformity.

3. Mercury: Special dispensing of mercury, high purity, not volatile.

4. Phosphor: High-purity, rare earth fluorescent phosphor with luminous efficiency.

5. Gas: Purity rare

8.DLLAMP old street lights for sale ballast Advantages

Long life and high efficiency Ballast:

1. American IC;

2. Japanese MOS tube;

3. Lightning protection device.

4. Special anti-surge protection circuit

5. Thick PCB, big panel, scientific circuit design

6. 6 patents

7. 5 years warranty.

9. DLLAMP old street lights for sale Lamp shade advantages

1. Material : Shell is made of shock resistant high pressure die-casting aluminum.

Light panel is made of heat resistant toughened glass (optional). Luminous efficacy is above 90%.

2.The heat dissipation structure ensures the luminous flux high output and reduces the attenuation of reflection coefficient.

3. Reflector : High pure aluminum anodic oxidization reflector with special designed is better for light distribution effect, which support excellent optical performance.

10. DoulightOld street lights for salein comparison witth LED

10. Certification of old street lights for sale

11.Ourservice of old street lights for sales

1. Replying your inquiry within 10 working hours.

2. Professional technical and commercial service provided by experienced staff.

3. Custom-made design is available, OEM&ODM are welcomed.

4. Our professional will calculate and provide excellent project for the use of light after you give us the using places, square, height, etc.

5. Providing 5 years warranty for low frequency lamps and 3 years for high frequency lamps and continuous after sales service.

6. Quick delivery.