Glare brightness selectable-JK-8999-2 led torch with rechargeable battery - JK-8999-2 led torch

LED led torch features:

1.Built-in 2 pcs high capacity maintenance-free lead-acid batteries rated capacity 450MAH(based on customer needs change).

2.Energy saving,high power,long life LED bulbs can be used more than 100,000 hours,directly a range of more than 150 meters.

3.Top lamp for lighting,top light is 1 pcs 1W,70-80LM LED lamp bead.

4.Shell adopt a new ABS material,good finish,high brightness.

5.Product equipped with a built-in plug(round or flat plug according to customer demand).

6.Charging Time:about 7 hours Discharge Time:7-8 hours.Color can be customized according to customer demand.

7.Product Size:(head)5(tail)*3.5*(L)26CM,MEAS:32.5*32.5*55CM,each box can be loaded 60 products,and there are 2 inner boxes,G.W/N.W are 13.5/11.5 KGS.

8.Portability,and use simply.

Instructions:

1.While charging,launch of the built-in plug,which at the tail of the product,plugged directly into AC 110~240V power outlet,then charge indicator lights up, indicating that the product is charging. Fully charged,unplug the torch.

2.Push the switch,you can use the top for lighting,push the switch back,you can turn of the lights.

3.During use,when the LED bulb goes dark,the battery is nearly fully discharge,at this time,in order to protect the battery,you should stop using and charge it in time(should not recharge the torch after the LED bulb goes off,otherwise damage the battery).

Cautions:

1.While charging,the head of the the product must be down and far away from combustibles.Never charging when there's no one in the night to avoid accidents such as fire.

2.The longest charging time is no more than 20 hours and not to use the product while charging to prevent possible inner component damage.

3.Do not direct light to people's eyes,otherwise you may hurt them.

4.If the product is left unused for two months,it need to be charged at least 8 hours,otherwise it will reduce battery life.

5.Charging power supply and charging should be safety norms.

6.Do not let product rain or wet,otherwise the usage life will be shortened.