Fire Rated Recessed Downlight in waterproof IP65 - HD-94210F

MR16 LV 12V X 50WATTS MAX FIRE RATED RECESSED DOWN LIGHTS

Please read instructions before commencing installation and retain for future reference

Specification: Recessed downlights 90mins fire protection rating in a appropriate 90min rated ceiling

Protection against electric shock: Class II (Double insulated do not earth!)

These fittings have no special protection against moisture in bathroom

Lamp type: GU10 240V & MR16 12V, Max 50W

Dimentions: Cut out:76mm; Overal Diameter: 85mm, Depth: 132mm; Lamp retention: Untiltable;

Temperature range: -20°C< ta <40°C

Supply: LV 12V 50Hz

Ingress Protection: 20

Suitable for mounting on normally flammable surface

Minimum distance from illuminated object is 0.5 meter

Installation:

Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this products, consult a competent electrician. The Installation must be carried out by a qualified electrician

1. The product is suitable for indoor use only. Not suitable for use in wet environment.
2. Please do not use surfaces which are damp, painted or metallic surfaces.
3. Ensure a minimum depth of 140mm is available.
4. Mark ceiling with appropriate cut-out size.
5. Before cutting, ensure that the hole does not impinge on joists, pipe work, cables or other building services
6. Ensure there is at least 100mm of free space around and 50mm above the luminaire. Do not cover the luminaire with thermal insulation
7. Connect supply cables Live and Neutral to fitting terminals (polarity is unimportant ). Do Not Earth.
8. Fit springs in position on luminaire is retained in position by the spring tension between the short and the long leg of each spring against the ceiling.
9. It is recommended to use ALLUMINIUM REFLECTOR lamps that produce forward heat.