Express T8 to T5 adapter/adaptor used in T8 luminaire - OL-001A t8 to t5 adapter/adaptor

1.Key features for t8 to t5 adapter/adaptor :

• Simply remove the old control gear from the existing T8 lamp and replace this with the tested and trend-setting HF technology. The new control gear is placed inside the lamp casing and is wired to the sockets.
• The retrofitting is done by an electrician within 4-6 minutes.
• This is how an entirely new T5 lamp comes to be, still in the same casing. The T5 fluorescent tube, however, is 51mm too short, and this distance is bridged with two Olink's distance adaptors.
• This retrofitting does not take second place to the quality of a new T5 lamp except for the price!

2.Installation Instruction:

• Turn off the power, remove T8 tube, starter and Magnetic ballast
• Install Electronic ballast
• Insert 2 adapters to each end of the T5 tube.
• Install the t5 tube into the set
• Check and confirm OK, turn on the power.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

3.Applications of t8 to t5 adapter/adaptor :

• Living room, Bedroom
• Hotel, Restaurant, Hall lighting decoration
• Factory, Plant, Warehouse, Office
• School, University, Hospital Conference, Meeting room, Showroom, Showcase

4. Drawing of t8 to t5 adapter/adaptor :

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

5.Other T8 to T5 adapter/adaptor products:(Please click on the picture)

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

6.Other lamp fittings:( Please click on the picture)

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

7.Our workshop and certificate:

We are manufacturing concern for the terminal block, wire connector,lamp holder, led connector, electronic ballast fittings, wiring harness, controller panel etc. possessed of passel high quality technical person with ability and management personnel, and continuously introdu-cing into advanced technologies, procuct equipment and test instrument. Company already has passed the ISO9001 quality system .

• Mould making

We have our own mould making workshop, High precision and quality. We could make new mould for customer if any specical requirement.

• Injection Machine

• Assembly Machine

• Packing

• Certificate

We make sure that we would surve you better. please do trust us!

...