dmx controller - ZJ-DMXI3CHRJ

DMX Controller with XLR Ports:

DMX controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.

Technical Parameters for dmx controller

Product Description for dmx controller

Details of parts:

SIMPLE INSTALLATION for dmx controller:


CONTROLLER AND DMX DECODER (2 IN 1):

With this fantastic accessory you will be able to fully control our strips from your centralized DMX console (the decoder converts DMX-512 control signals to PWM controller signals for driving our Core Strips). But in absence of DMX signal you can use DMX02 as a complete RGB controller, with built-in testing and standalone features (see more in Extended Information).

DMX ADDRESS CODE SETTINGS for dmx controller

In order to set the DMX address code if the Decoder the product has a switch panel, which uses Binary numerical code switches to set the DMX address.

In the panel there are 10 switches, the first 9 switches set the code itself using binary values (1 is the lowest, with a binary value of 1 and 9 is the highest, with a binary value of 256), so by the combination of this 9 switches a total of 511 DMX address codes can be generated.The last switch is a Function switch (FUN) and determines whether the decoder works in DMX mode (receiving signal form console) or works as a standalone Color Controller.

How to operate the switches?

It is actually easier than it looks, each switch can be OFF (value 0) or ON (value 1). For the FUN switch (number 10), when it is OFF (value 0), the system works with the DMX signal. When it is ON (value 1), it works as Standalone Color Controller. And as we will see, in this mode, the rest of switches will allow you set the different saved programs and set the speed of the color changing programs, but lets explain first how to use switches 1 to 9 to set a DMX address.

When operating in DMX mode, the switches 1 to 9 set the address code of the decoder within the DMX universe. To do that, each switch is assigned a binary value: 1, 2, 4, 8, 16, 32, 64, 128 and 256. and this value is added to the address value when the switch for that value is ON.

Example1 : If you want to set the DMX address code to 37, you will have to switch ON the switches numbered 1 (value 1), 3 (value 4) and 6 (value 32) since 1+4+32 = 37.

Example 2: If you want to set the code to 328, then you will have to switch on the switches numbered 4 (value 8), 7 (value 64) and 9 (value 256)because 8+64+256=328.

2013 NEW HIGH-TECH PRODUCT