DC12-24V LED dmx decoder led dimmer - D8008

Features:

1.Meet with standard DMX512 basis border agreement

2.Gray level 256, full color drive control

3.No flicker, high frequency output, no jitter.

4.Three channels, single channel maximum 4 amp output, the total output is not more than 12A/18A

5.Cooperate with control system, can realize rich change effect

6.Through the digital tube display the current address code, switch design address code, and the address code with self locking function.

7.Good anti-jamming, humanization terminal design.

Specifications:

Product Operation

1>: Product panel operation instructions,through the digital tube display the current address, through the switch control address code, when adjust to the address code of you need, can press lock key and lock the current address code, if in the current state not press the lock key, the system 3 seconds self-locking address, demand reset address code, first press the unlock key, then set the address code. (in the lock key operation, the third paragraph digital tube will show the corresponding instructions), if in 5 minutes didn't any operation with the switch, so digital tube will close, If want to see the show again, then press the unlock key.

* Address code Settings: such as the first D8008, put into 001, the second is set to 004. A D8008 accounted for three IP address.

*With self test procedures, numerical Settings to 511 address, so is 3 channel CH1 and CH2, CH3 change, if is 512 address, then is colorful gradient effect.

2> : DMX input/output terminals. See panel connect correctly.

3> : 4PIN is driver output interface (of altogether anode output driver, with a LED + interface and 3 channels CH1-CH2-CH3-output interface, may meet all kinds of full-color module and monochrome module automatically according to the lamps module load regulation output pulse). 2 PIN is the power input interface (supply the power for decoder itself and decoder with lamps).

Wiring diagram

Our Certificate:

Our Packing: