DALI GC Dimmable controller12V/24V for strip light MR16 - LDL-12V-100

DALI GC Dimmable controller12V/24V for strip light MR16, DALI GC module is designed to connect directly to the DALI - details see: https://www.lightinghere.com/dali-gc-dimmable-controller12v-24v-for-strip-light-mr16-10000972

Place of Origin: Guangdong China (Mainland)	Brand Name: Huayueke	Model Number: LDL-12V-100	Type: Manual Switch
Max. Load Power: 100W	Voltage: DC 12V

DALI GC Dimmable controller12V/24V for strip light MR16

Features:

LDL-12V-100

Input voltage: DC 12V

Output voltage: 12VDC Max

Output current: 8A

Power:100w at max

Efficiency:99%

Load:strip light/module/MR16

Size: 132*43*21mm

DALI Group Control(GC)is an unit as group control and programming used in DALI system, you can choose any 2 groups or broadcast from 0 to 15 groups by the rotary encoder located at the backside, with GC you can control the ON / OFF / Dim up / Dim down of the system and also you can enter into programming mode to choose a ballast to add or cancel a group.Compared to DALI GC, DALI GC-n doesn’t have the programming function only. The module input is configured for use with a standard

momentary switch.

Programming Mode:

GC can provide flexible group programming function and allow any ballast to be group appointed.All the ballast should have short address before programming mode.

Setup

GC can control 0~15Group Or broadcast. You can appoint any 2 groups to GroupA and GroupB by the rotary encoder

Wiring Connections

The DALI GC module is designed to connect directly to the DALI communication bus (polarity free). The module draws its power from the DALI bus (5-7mA). It is important to note that a DALI power supply must be present somewhere on the communications bus installation to support all connected DALI control modules.

Packaging Detail:common package or depend on the customers

Delivery Detail:7days after the deposit