Battery Powered Wireless DMX LED Par Light (YL-PAR-144RGBW) - YL-PAR-144RGBW

Technical Specifications:

Lighting Specs:

Working Voltage: 100-240V AC 50-60Hz
Light Source: 144 LED 0.06W R: 36 G: 36 B: 36 W: 36
Max. Power: 10W
Beam Angle: 15 degree
Battery: Built-in Li-ion battery for 7-28h of operation
DMX Channels: 4 or 6 Channels
Control mode: 2.4GHz Wireless DMX512, Master/Slave, Auto Run,
Sound Active
Dimensions: 24cm X 22cm X11cm
Net Weight:: 3Kg
Applications: Movable Stage, Shows, Clubs, Shops and
Outdoor projects.

Wireless DMX Specs:

Tricolor LED displaying
126 channels automatical jumping frequency, high
anti-jamming ability to ensure working reliability.
7 groups ID code settable, User can use 7 groups individual
wireless net without any interfere each other in the
same place.
Communication distance: 700M
Work frequency section: 2.4GHz ISM band,126 channels
frequency section.
Max transmitting power rate: 20dBm
Receiver sensitive: -94dBm

Battery Specs:

Cell QTY: CJ18650/2200MAh X 18PCS
Cell Composition: 6 in parallel 3 in series
Rated Voltage: 11.1V
Discharge Voltage Range: 8.25-12.6V
Rated Capacity: 19.8Ah
Charge Voltage: 12.6V
Charge Methods: Constant Voltage/Constant Current
Standard Charge Time: 8 Hours
Discharge Cut-off Voltage: 2.75V/Cell
Overcharge Protection Voltage: 4.25V/Cell
Circulation Life: Not less than 300 times

Applications:

The unit is designed to be applied in movable stages, shows, pubs, shops and outdoor projects. It is with high power Red, Green, Blue and White LEDs to mix all kinds of changing colors, using 2x8 digits LCD to display all control functions. It is with the functions of stand alone, linking or connecting with DMX controller. User can input their own data to edit and control the lights.
There are built-in programme to realize multiple units for color change, color strobe, color dimmer, color gradual change, color jump change, DMX programme ( Multiple units linked can realize thousands of effects).

Function Descriptions:

Full color dimming: 255 grade brightness tunning, sound activation
Full color Jumping change: Red, Green, Blue and White color jumping in turns, 255 grade speed control, sound activation
15 color jumping change: 255 grade speed control, sound activation
Multicolor graduating change: 255 grade speed control, sound activation
Multicolor strobe: 7 colors strobe in turns, 255 grade speed control, sound activation.
Auto Run, Built-in programme circulation
Master/Slave: Multiple units linked, slave changes with master synchronizingly.
DMX dimming: Different units are assigned their own DMX address, their outputs are changing with the data of the DMX controller.

Operation Panel:

1-LCD Display 2-Operation Button 3-Wireless DMX Indicator 4-Sound Activation Indicator 5-DMX Signal Indicator 6-MIC 7-DMX Socket 8-Antenna 9-Battery Charging Indicator 10-Power Out 11-Power In

Button Description

MODE:Working Mode Switch

SETUP:LCD Cursor Moving Key, Flashing Position is the parameter to be revised

UP:Data Up

DOWN:Data Down

Function Setup

Built-in Function Setup

Press SETUP key to switch among all sub-function key, speed, sound button, etc. Cursor flashing position is the parameter to be revised. Press UP or DOWN to adjust the data. It can be master unit.

For example: LCD displays"4.FADE S010 A:N"

4.FADE: NO.4 function, Fade

S010: Speed value 10

A:N: Sound Activation closed

AUTO RUN

Auto Run the combination function of all sub-functions, it can be the master unit, set the Sound

Activation parameter to be "N" to close the Sound Activation Mode of the sub-function.

DMX Address Setup:

AddressRange: 1-512, Press UP to setup address upward and DOWN to setup address downward. There are two DMX channels for your choices: DMX 4CH & DMX 6CH

DMX 4CH Mode

CH1:0-255 Red Dimming Range

CH2:0-255 Green Dimming Range

CH3:0-255 Blue Dimming Range

CH4:0-255 White Dimming Range

DMX 6CH Mode:

CH1:0-255 Red Dimming Range

CH2:0-255 Green Dimming Range

CH3:0-255 Blue Dimming Range

CH4:0-255 White Dimming Range

CH5:R, G, B, W General Dimming

CH6:Strobe Speed

Slave Mode:

Choose Slave Mode, Synchronizing with Master Unit.

Wireless ID Setup:

Press SETUP, UP OR DOWN at present mode to display current ID, press again to setup new ID, ID value will be added 1 more by pressing one time, ID indicator color will change according one by one.

Working Status:

LED constant light: Showing current ID, no DMX or wireless signal

RED LED flash: Transmitting

Green LED flash: Receiving

ID code and LED color corresponding relationship:

1:RED

2:GREEN

3:RED+GREED---------------Yellow

4:BLUE

5:RED+BLUE------------------Purple

6:GREEN+BLUE--------------Cyan

7:RED+GREED+BLUE------White

BatteryPower Left Indicator:

If there is no operation for 15 seconds for all Keys, it will automatically showing battery power status. Current value is the percentage of the total full power.

Description for LED Indicators:

RF-ID: Tricolor LED to indicate working status and ID code.

SOUND: Sound Indicator, flash when signal is strong enough, no relationship with setup.

DMX: DMX signal indicator, flash when there is DMX signal or connected with master unit.

CHARGING LED: Battery charging indicator, Red is charging, Green is full.

Recommended to use:

Read the user manual and labels on the lighting carefully before use.

Please use the unit where there is no rain.

When using, keep away of hot source, high pressure, avoid kids, never throw or hit the unit.

Use the supplied power adapter only, never charging over 24 hours.

Never dismount the light or battery by yourself, not to place the unit in a wet environment to avoid danger.

When not using the unit for long term, please save the unit properly in a dry place, battery should be half charged.

Please bury the used unit, never throw to fire or water.

Warning:

Place the unit where kids can't reach.

If the charging time over the standard charging time for long, it is advised to stop charging. It will extend the charging time if charging while using, it is advised to turn off the light when charging.

Never place the unit inside microwave oven or any pressure container, instant heating or leakage (or abnormal smell), the unit should be abandoned and treated properly.

Not to use the unit in an environment where there isstatic electricity, the battery protection circuit might easily get broken if the static electricity is over 1000V, causing battery working abnormally, heating, smoking, deforming or fire.

Product Pictures: