8w/12w/18w/25w/30w/35w/40w/54w led swimming pool lights - led swimming pool lights
Item Type: Pool Lights | Emitting Color: red, green, blue, yellow and white | Light Source: Ultraviolet Lamps | Certification: CE,RoHS,CE,RoHS |
IP Rating: IP68 | Lamp Body Material: Stainless Steel | Beam Angle(°): 120 | CRI (Ra>): 85 |
Input Voltage(V): 12 | Lamp Power(W): 54 | Working Temperature(℃): -30 - 65 | Brand Name: rt-tech pool light |
Place of Origin: Guangdong China (Mainland) | Model Number: led swimming pool lights | skype: vicky-1213 | Color: RGB and single color avaliable,rgb, white,blue,red.. |
IP standard: IP68 | Application: water depth: within 5meters | Voltage: DC/AC12 24V | Glass: clear tempered glass 5mm |
Waterproof Standard: IP68 |
pool lights
LED underwater swimming pool light
swimming pool light
pool light
led swimming pool light stainless 304 and abs material
Contact:
s k y p e : vicky-1213
Ma*l: vicky*szrttech.com
Tel: 13590351952
New Model
Dimension:298*76mm
Maerial:Stainless Cover+PC cover
LED Source: F5LED 252 /351 /501 leds
Wattage: 18W/24W/35W
Voltage: AC12V
Change mode: outside remote and inside remote
Cable length: 2m
Installation: Wall Mounted
Color: single Color:red, green,blue,white,warm white,cool white, yellow and RGB
Remark: the plastic ring can be blue,orange and white
1. a par56 lamp with out casing , can work for 18w,25w,35w,40w,54w.
Instructions of remote control
1.RGB gradient change illuminated in the first power on or press button “D” to turn on the light
2.Switch off/on the power each time,the color will be changed with following sequence:Red→green→blue→RGB→RGB gradient change slow→RGB gradient change fast→disco mode slow→disco mode fast→The speed is constantly changing on the flickering effect
Instructions of remote control
1)Continue pressing the button “A” to make the 3 group led change in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB
2) Continue pressing the button “B” to make the 3 group led change in 3 modes:
- RGB gradient change
- Disco mode
- Blinking change
3) Pressing button “C” to adjust the speed of “A” and “B”
4) Pressing button “D” to switch on/off the led light
5) It will reset in 5 seconds after power off
6) The remote control can operate many led lights synchronously
Installation procedure
- Screw the bracket into the wall
- Mount the clip of the bracket into the hole of the light
- Screw the detailed illustrations in the below pictures
Packaging Detail:Normal Packing Or customized |
Delivery Detail:7-10 working days |