8inch/6inch hydroponic Grow light Cool tube reflecotor - TD-CR6

6inch hydroponic Cool tube reflecotor

Suit for 250w & 400w &600w & 1000w HID lamps

- most economic design for air cooling

- tempered glass, long life span

- imported german aluminum, high reflective

- build in lamp socket and cord, easy using and safty operating

- Size available for Ø125x400mm, Ø150x500mm, Ø150x600mm, Ø150x800mm, Ø200x600mm

TheCooltubeis an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its centre. It's perfect for removing the excess heat generated by HID grow lights without leaking unpleasant odours; as far as we know it's the only fully sealed system on the market (other manufacturers claims that theirs are but in our experience they are definitely not).

Air is usually pulled (but can be pushed) over the lamp by adding an extractor fan to one side of the tube, the hot vented air is then expelled away from the growroom and plants. They're very effective, somewhere in the region of 70-80% of heat is removed, and are therefore very popular with indoor gardeners who have limited space to work with.

There are two diameters of glass tube available, 125mm and 150mm. The 125mm diameter is suitable for use with the 250W and 400W versions, the 150mm diameter is suitable for use with the 600W and 1000W versions. There are several other products you may need to purchase if you don't have them already, we've listed them below to make it as simple as possible for you to get everything you need. If you wish to see further details on any of these items just click on thier pictures in the related products section. Please note that the 1000W ballast comes with an IEC connector that will need to be fitted to the reflector cable.