60W water proof Led driver - NVH6012V

1. power: 60W, 2.Built-in active PFC function, 3.provide open&short circuit protection - details see: https://www.lightinghere.com/60w-water-proof-led-driver-10003537
Place of Origin: Guangdong China (Mainland)Brand Name: FYModel Number: NVH6012VRated Power: 60W
Lamp Power: 60WStart Time: 1-3 secondsPeak Voltage: 270VNon-Reclosed Voltage: 12V
Capacitor: 130℃Connection Mode: leading connectionframe: aluminium alloyPFC: 95%
Efficiency: 85%With PFC function: 2 years warrantyInput Voltage: 90~295VAC 127~417VDCApplication: outdoor
water proof: IP 67certificate: CE&ROHSOperating Voltage: 100-240Vsample: available
60W water proof Led driver
contact supplier for 60W water proof Led driver


LED Driver

FY-60-12

OUTPUT

DCVOLTAGE12V
LED OPERATION VOLTAGE8.4-12V
RATEDCURRENT5A
CURRENTRANGE0~5A
RATEDPOWER60W
RIPPLE&NOISENOTE.22VP-P

VOLTAGE ADJ.RANGE

11.5-13V
.Can be adjusted by internal potential meter SVR1
CURRENT ADJ. RANGE-25%-3%. Can be adjusted by internal potential meter SVR2
VOLTAGETOLERANCE±10%
LINEREGULATION±3.0%
LOADREGULATION±5.0%
SETUP TIME3000ms/115VAC,1500ms/230VAC? at full load

INPUT

VOLTAGERANGE90~264VAC? 127-370VDC
FREQUENCYRANGE47~63HZ
POWER FACTORPF>/=0.9 at 75-100% load, 115vac/230vac
EFFICIENCY81.5%
AC CURRENT0.8a/115vac? 0.4A/230vac
INRUSH CURRENT40A/230vac?
LEAKAGECURRENT<0.75mA/240VAC

PROTECTION

OVER CURRENT

95-110%
Protection type:CONSTANT CURRENT? LIMITING, recovers automatically after fault condition is removed.

OVER VOLTAGE

13.8~16V
Protection type:Shut off o/p voltage,claming by zener diode

OVER TEMPERATURE

95°C±10°C (TSW1)
Proterction type:Shut down o/p voltage recovers automatically after temperature goes down

ENVIRONMENT

WORKINGTIMP-30~+50°C(refer to output load derating curve)
WORKINGHUMIDITY20~95%Rhnon-condensing
STORAGE TEMP HUMIDITY-40~+80°C 10~95%RH
TEMPCOEFFICIENT±0.03%(0~50°C)
VIBRATION10~500HZ,2G10min/1cycle period for 60 min each alongX,Y,Zaxes

SAFETY&EMC

SAFETYSTANDARDSUL1310 CLASS 2,TUV EN61347-1 CAN/CSA C22.2 NO.223-M91(except for 48V),IP64 approved? design refer to TUV EN60950-1,EN61347-2-13,
WITHSTAND VOLTAGE1/P-0/P:3KVAC
ISOLATIONRESISTANCE1/P-0/P:>100M Ohms/500VDC/25°C/70%RH
EMI CONDUCTICN&
RADIATION		Compliance to EN55015
HARMONICCURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN50204,EN61000-6-1 Light industry level criteriaA

QTHERS

MTBF497.8KhrsminMIL-HDBK-217F(25°C)
DIMENSION181*61.5*35mm(L*W*H)
PACKING0.5Kg? 24pcs / 13Kg / 0.25CUFT
NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4.Please refer to OLP characteristics.
5.Derating may be needed under low input voltage. Please check the derating curve for more details.
6.Output voltage can be adjusted through the SVR1 on the PCB limit of output current level can be adjusted through the SVR2 on the PCB
7.Constant current operation region is within 70%-100% rated otput voltage.This is the suitable operation region for LED related applications, but please? reconfirm special electrical requirements for some specific system design.

Packaging Detail:0.5Kg; 24pcs/13Kg/0.75CUFT
Delivery Detail:1-2 week

Related Product for 60W water proof Led driver