500 watt induction lighting grow for sale - YUA-SD*LG01

500 watt induction lighting grow for sale

Applications with High Potential for Induction Lighting

• In hard-to-reach locations that make maintenance costs high, such as street lighting and tunnels, or in high ceilings where there is continuous operation, such as hotel rotundas
• Cold environments, such as supermarket walk-in coolers and freezers
• Where high-quality lighting is required or highly desirable
• Where reliability is highly valued
• Where high lumen output is required
• Areas that require lamps to reach full illumination immediately.

Long Lifespan

Experience with using induction lighting at the U.S. Department of Energy's Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico, has demonstrated the long life in actual usage. WIPP's first induction lighting system was installed in 1998, replacing high-pressure sodium (HPS) lights. More than 10 years later, all but three of the original 36 induction units are still operating after more than 88,000 hours of continuous, 24/7 operation. Additional systems were installed in 2002 and succeeding years, both indoors and outside, with excellent results

Having said that, there are some caveats. One induction bulb's rated life is only 15,000 hours and its output is only 1,100 lumens. It is a self-contained all-in-one screw-in unit that can directly replace a conventional incandescent or compact fluorescent bulb. This bulb targets different applications than those of most other induction lighting systems because of both its lower light output and shorter life. See our About Induction Page for a direct comparison.

Two of the top manufacturers of induction lighting systems have an average rated life of 100,000 hours, including the ballast. Some other manufacturers only rate their ballasts for 60,000 hours, even though the bulb may last longer. Check out the warranties before buying. Some manufacturers offer full five-year warranties on the entire induction lighting system. Others offer shorter warranties on some or all components.

Although they may last 100,000 hours, after 60,000 to 100,000 hours of operation the initial lumen output of many of the induction lighting systems drops to 70%—the point where relamping is often recommended.