2012 new good hid xenon kit free sample - single kit

General paramater
Operating Temperature :-40 to 105 c
Steady State light Output: 3000lumens typical ,bulb type dependant
Turn on Light Output: >70%at 2 secs, >85% at 3 secs
Expected Ballast Life: >3500 hrs
Radiated EMI Susceptibility: S95/54/EC
Radiated EMI Emissions: S 95/54/EC
Cooling: Air cooled
Maximum Cable Cable Length: 500mm
Output Wave Form:125 Hz square wave
Steady State Output Power:35W
Open Lamp Circuit Protection: Latch off after 1 second
Shot Circuit Protection: Latch off after 1 second
Maximum Output Current: 8 A initial lamps on, 3A next 2 secs
Maximum Output Power:80W
Steady State Output Volts:85V
Striking voltage: 23000V
Flickering: No flickering: during steady status
Electrical Input
Steady State Input Voltage: 9~16 V
Max in Rush Current: 15 A @ 50ms,8 A at 2secs
Decreasing to Steady state within 30 secs
Max Steady State Input Power: 45W (9 to 16V)
Input Turn On: 9 V and above
Input Turn Off: Below 8 V
Reverse Voltage Protection: No damage to ballast with -40V
Conducted EMI Susceptibility: S95/54/EC
Conducted EMI Emission: S95/54/EC
Compact Size: 80 X 70 X 30 mm
Weight: 0.41 kg
Efficiency: Over 90% during steady status

Parameters of lamps:
A: Color Temperature: 3000K; 4300K; 5000K; 6000K; 10000K; 12000K
B: Output: 35 Watt
C: Starting Voltage: 23 KV
D: Lumen: 3200LM
E: Life: 3000 Hours
F: AS for H4 Hi/Lo lamps, the ray axis can be control forward and backward for 4 mm, and up and down for 1.2 mm.

G: Model available: H1,H3,H7,H4,H4H/L,9004,9005,9006,9007,H13
A complete set of HID conversion kits includes:
A: Two pieces of lamps;
B: two ballasts,;
C: all accessories: (a. Relay and fuse box 1 piece. b. Cable 1 set; c. Metal plate 2 pieces; d. Cable tie 20 pieces; h. Screw (A) 4 pieces; Screw (B) 4 pieces; Screw nut 4 pieces ; Washer 4 pieces Double-face tape:8 pieces.)
D: Installation Instruction Manual, warrantee card.
E: For H4 H/L:a piece of power harness.