165W energy efficient light bulbs - EL-165-05

With the characteristics of long service life, enegry saving, high security and environmental protection, the induction lamp is suitable to applied to the places such as factory workshop, school, library, greenhouse, hall, conference room,square, large shopping mall ceiling, tunnels, subway stations, traffic complex zone (street, bridge), subway station, dangerous region of station or industrial and mining enterprises lighting, road lighting ,tunnel lighting, landscape lighting and so on.It has the significant advantage for the places where are not easy to change and high maintance cost.

1.High Efficiency and Energy Saving

System effective luminescence efficiency can reach to 110Lm/W and the power factor is more than 98% which reduced the reactive power consumption. More than 90% energy are saved than incandescent lamp, 50% of high-pressure mercury lamp and high pressure sodium lamp.

2.environmental protection

It used solid state amalgam and lead-free glass, and more than 99% of the materials can be recycled which accords with the environmental protection requirement.

3. Long Survice Time

Filament aging and the sputtering of the electrodes are key components which limited in their life of the traditional light source while the electromagnetic induction lamp is without filament or electrode which uses electromagnetic induction coupling to excitate light so the service life could up to 60000 hours or more.

4.High Colour Rendering Index

The three fluorescent colors powder, high photoelectric conversion efficiency, high luminous efficiency maes the color rendering index greater than 80. The light is soft and close to the sun light with low glare to show the natural color of the illuminated objects.

5.High Power Factor

The circuit uses special design and the power factor can reach above 98% with low harmonic and excellent electrical properties.

6.No Stroboscopic Light Source

"completely without stroboscopic effect " for the work frequency can reach to 2.65MHz, and does not cause eye fatigue.

7.Low Lumens depreciation

2000 hours of maintenance rate is 95%, 20000 hours maintenance rate is 80%,and 60000 hours maintenance rate is75%.

8.Transient start and restart

Open and bright, the switching frequency is up to 200000 times.

9.Wide range of working temperature

Amalgam technology is used so preheating is not necessary., it can start correctly and work at -40°Cto 55°C

10.Low maintenance cost

Electromagnetic induction lamp reaches more than 60000 hours of survice time which greatly reduce the cost of maintenance abd replacement ,therefore, it is especially suitable for the place where difficult to light or important place with high safety requirements.

11.Electromagnetic Compatibility:

Electrical Properties Comform to the National Standard:

GB17743-1999

GB17625.1-1998

GB19625.2-1998