Wi-fi led controller

Summarization

LED WiFi controller is following the traditional with infrared, RF technology controller foundation, it is birth of market and customer's demand, it is one type controller which integration the newest wifi technical in the market. It makes the LED control more convenience, more hommization. We can use an Android system or IOS system mobile phone to install control software, then it can control LED, this is the wishes of every customer.

Use WiFi technology can make our control range more wider, can get rid of narrow space constraint, in building can control more than 50m, in outdoor can control more than 100m.

In the condition of not use the mobile software, also can use the remote control to control, very convenience, bring many choices for you.

Technical Parameters

1. Remote control technical parameters

1:Working temperature:-20-60°C

2:Power supply method:AAA*3

3:Supply voltage:1.5V*3

4:Standby power:0.015mW

5:Standby current:3uA

6:Working current:200uA

7:Emission current:10mA

8:Remote control distance:about 20m

9:Standby time:6 month

2. Software technical parameters

1:Name:Dream Color

2:Runtime platform:Android version support Android system(better one can support

Samsung, HTC), IOS version support IOS system, equipment must have WiFi function.

3:Byte: Android version(622K),IOS version(581K).

4:Language: English

5:Category: communications

6:Free, green, no plug-ins

3. Controller technical parameters

1:Working voltage: DC5--24V

2:Output control: can flexible control 3 channel, 2 channel, 1 channel LED lamps.

3:Output current: 4A*3

4:Connect mode: common anode

5:External dimension: L107*W65*H30(mm)

6:Receiving sensitivity: 802.11b DSSS(-5dBm),802.11b CCK (-10dBm),802.11g

OFDM(-15dBm)

Product constitute

Explain installed hardware

1. Install ANT

ANT's installation drawing:clockwise install WIFI antenna and anticlockwise take down the antenna.

2. Power supply and LED equipment

This connector structure belong to drawer structure, the device interface of power supply and LED is together, four interface one the left side (3,2,1,V+)is connect led equipment, the fifth interface is connect the anode V+ of power supply, the sixth interface is connect the cathode V_ of power supply. According to the rated voltage of led lamp, we supply power to controller, and the rated voltage of controller is 24V. As follows: