100 bulbs Solar LED String Light IP44 - ENST-SE
Place of Origin: Guangdong China (Mainland) | Brand Name: Enrich | Model Number: ENST-SE | Length: 7M |
Rated Power: 0.09 | Holiday Name: Holidays | Voltage: 12V | LED Qty: 60pcs, 100pcs, 200pcs |
Solar panel: 2V/100mA | Storage battery: 1 pcs AA nimh batteries (1.2V/1200mAh) | Color: white, warm white, blue, RYBG | Working time: 8 hours |
charging time: 8 hours | modes: Flash and steady on | Warranty: 1 year |
Solar LED String Light
Product Specification
* Solar panel : 2V/100mA
* Rechargeable battery: 1pc of Ni-MH AA type 1.2V/1200mAh
* Number of LED: 60PCS, 100PCS, 200PCS
* Color of LED: white, warm white, blue, multicolor
* Packing Size: 180*95*80mm
Solar LED String Features:
1. No wiring needed, it’s powered by solar energy
2. LED light can keep glowing for about 8 hours a night after fully charged during daytime
3. Waterproof, suitable for indoor and outdoor use
4. Great for Garden Christmas, party or other celebration occasion
5. Auto Sensor controls lighting and recharging
6. Two Light Modes:
a) Flashing
b) Steady on
7. Light color: white, warm white, blue, RYBG
Pictures:
Product Introduction:
The solar LED string lights are a kind of solar-powered decorative lights that are made up of some LED lights. The highly efficient solar panel will convert solar energy into electrical energy and store in the built-in battery for the LED. The specific light-control system makes sure that the lights will be charged in the daytime (enough light) automatically and light in the evening (low light). In addition, the lights are easy to install, waterproof and sunproof. This product is widely used in the place of roads, courtyards, shopwindows, stores, halls, stages, etc. Especially, it will create a warm and romantic holiday atmosphere to be used for Christmas tree.
Product Performance
* It will continuously light 6-8 hours if it is charged over 8 hours by the enough sunlight.
* Product lifespan: more than 1 year.
Method of Operation
1. Connect the control box and the stake.
2. Drive the stake into the ground and make sure that the solar panel is not sheltered from the sun.
3. Set the lights on the places you want, like trees, shopwindows, stages, etc.
4. Tear out the protective film on the solar panel. Press the button ON/OFF to turn it on and it will work normally. You can also change the flash mode through the button MODE.
Important Information
1. As the charging effect of the solar panel is depended on the sunlight, the LED light time is affected by weather, seasons, places, etc.
2. It is charging only when the button is turned ON.
3. Don’t put it in the water for a long time, for it is only designed to be protected from the rain and the humidity.
4. Don’t strike the product, so as not to cause irreversible damage.
5. The stake is so sharp that you must be careful when using it. And don’t let children play with it.
Packaging Detail:standard |
Delivery Detail:7-10 working days |