T8 Tube Light Casing - LEZ-8-N

Easy to install, high light transmittance, zero diffracting spot, no dark zone,. Low power consumption, high intensity - details see: https://www.lightinghere.com/t8-tube-light-casing-10001635
Place of Origin: China (Mainland)Brand Name: LEZModel Number: LEZ-8-NMaterial: Aluminum+PC
Shape: RoundStyle: 1/3 Aluminum+2/3 PCModel: T8Marketing: Japan
Craft: extrusionView angle: big view anglePC material: Teijin or MitsubishiSize: 600mm,1200mm, 1500mm or customized
Color: transparent,transparent with strips, milky, milky with linesPart: Al heat sink+ PC cover+end capsTransmitance: high transimantance 85-92%Application: housing, factory, school, office.etc...
T8 Tube Light Casing
contact supplier for T8 Tube Light Casing


Drawing:
Product name:
T8 LED tube light kits
Serial number:
LZPC-8-N
Specification:
26mm*1.0mm
PCB size:15.0mm×1.0mm (width×thickness)
PC cover type:1: Transparent
2: Transparent with inner strips
3: Diffused
Assembling:
2/3 PC cover + 1/3 heat sink + two end caps
Material:
1: Polycarbonate(Teijin or Mistubish)
Transparent PC Material / Milky Diffused Material
Raw material mode:
PC-3110ZHP,PC-1250Z-100,PC-S2000UVR,PC- 2215,PC-EKD2108.
Flame retardant: 94-V2, 94-V0
2: AL 6063 (6063-T5 navigational aluminum)
Power supply device:
external power supply
Transmittance:
2: Diffused PC cover ≥ 87%.
Beam angle:
≥207°
Features:
1: High transmittance,
2: Uniform luminous,
3: Anti-yellowing: not going yellow in 3-5 years ,
4: High anti-UV index,
5: Good freezing resistance: Non-embritterment above -50°C ;
6: High thermo stability: without distortions below 130°C.
7: Glow-wire test past 650°C.
8: The 6063-T5 aviation aluminum is good at rapid heat dispersion.
9: The warranty can be up to 5 years, under the proper temperature
conditions in doors.
Test methods:
1: Salt mist test,
2: High free drop anti cracking test,
3: high and low temperature test,
4: Anti-yellowing in outdoor exposure test.
Inspection accordance:
professional standards
Tips:
1: The general problem of the PC cover mostly refers to appearing irregular cracks in
the use of the tube lighting, which is mostly caused by chemical substances. The
reason is that the prestress of the polycarbonate and BPA of the raw material can
produce chemical reaction when they meet chemicals.
2: In case rise the problem as above, Paying attention to not applying some
substances as following:
A: Industrial Thinner,
B: Alcohol,
C: Plate washer water
D: The instant glue whose PH≥6.
E: The printing ink on the PCB and the glue on the leds should
apply materials with the property of un-printing and volatility.
Packaging Detail:100-200pcs in one carton,and each tube is seperated by PE film, then use the peal cotton around goods on the four sides in the carton
Delivery Detail:less 2000sets, within 5 days, over 2000-10000sets, within 10days

Related Product for T8 Tube Light Casing