Maylightled Touch led RGB Controller - MY-Touch-A1

Maylightled Touch led RGB Controller, 1.Voltage,12~24V DC, 2. CE& Rohs approved, 3.Common anode,output 3 channel - details see: https://www.lightinghere.com/maylightled-touch-led-rgb-controller-10001001
Place of Origin: Guangdong China (Mainland)Brand Name: MaylightModel Number: MY-Touch-A1Type: Remote Control
Max. Load Power: 216W/12V;432W/24VVoltage: 12-24V  
Maylightled Touch led RGB Controller
contact supplier for Maylightled Touch led RGB Controller


Maylightled wifi Touch led RGB Controller

Technical Parameters for controllers

Cover MaterialABS
Fabrication ProcessingMulticolor printing & UV varnish
Working temperature-20-60 Celsius Degree
Supply VoltageDC12V-24V
Output3 channels
Connecting Modecommon anode
Frequency433.92Mhz
External Dimension(L)65x(W)56x(H)24mm
Packing Size127x127x27mm
Static Power Consumption<1W
Output Current<6A (each channel)
Output Power12V: <216W, 24V: <432W
Output PowerWithin 50meters

Technical Parameters for Remote

Cover MaterialABS
Fabrication ProcessingMulticolor printing & UV varnish
Working temperature-20-60 Celsius Degree
External DimensionL89ΧW70ΧH28mm
Packing SizeL120 Χ W70 Χ H50 mm
Frequency2400-2483Mhz
Typical application

Key Function

How To Use
Match CodeFor a new kit ( remote& controller), the remote can work only when it is programmed to the controller.

Please follow the below instructions:
Confirm correctly connect the power supply, LED controller and LED load.
Press key 1 once within 3 seconds when power on again,the light will blink 3 times when it is done
Clear Code
The code can be cleared as needed.
The kit(Remote & Controller) will stay in the original state after code clearing,and it can work when code matching is done.
Please follow the below instructions:
Confirm correctly connect the power supply,led controllers and led load,
Press key 1 five times within 3 seconds when power on again,the light will blink 6 times when it it done.
Attention

1.Please check whether the input voltage of the constant voltage power supply is in accordance with the controller,

and please check the connection of both the cathode and anode, otherwise the controller will be broken.


2.Please do not connect wires with power on.Please switch on only when it is in right connection and no short circuit.

3.Please keep your figure off the touching ring when installing the batteries, to improve its sensitivity,

and use the remote (3 seconds later) after the installation.Please reinstall the batteries, if the touching ring is found low-sensitivity.

4.Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise,

the remote distance will be seriously affected.

Packaging Detail:neutral packing
Delivery Detail:3-5 working days

Related Product for Maylightled Touch led RGB Controller