2014 Top Sell DMX decoder,DMX LED Flame Light,led rgb dmx decoder DE8012(OEM Available) - DE8012(OEM Available)

Model:DE8012

2014 Top Sell DMX decoder,DMX LED Flame Light,led rgb dmx decoder DE8012(OEM Available)

Features:

1.Meets DMX512/1990,with RJ45 interface and Pins.

2.256-levels brightness,full-color with driver controls

3.Output 12 channels,MAX 4A per channel.Total current is 48A. And 12 channels backup interface.

4.Can achieve asynchronous color changes effect under working with controller.

5.Cooperate with control system, can realizerichchange effect.

6.Setting the DMX address freely

7.Modularizing and can be matched with different LED module neatly.

8.There are 3 x Max20A 4pin power in connectors, please apply according to LED load power requirement.

9.Custom-made,available.

2014 Top Sell DMX decoder,DMX LED Flame Light,led rgb dmx decoder DE8012(OEM Available)

Tech-parameter:

Size

Function Instructions:

1.Drive output interface is altogether anode drive, has eight V + interfaces and 12 channel R, G, B output interfaces, can meet all kinds of full color module and monochrome module automatically according to the lamps module load adjust the output current, each channel maximum must notover4A.

Note:The anode connection full-color module can be directly put the positive line and R, G, B line connected to the decoder output interface corresponding foot position; Monochromatic module can put the positive line to the decoder's output interface V + feet, negative line according to the color of the module connected to the decoder output interface R, G, B a foot position; A few kinds of color of monochromatic module connect to the same decoder, must put their positive line to the decoder output interface V + feet.

1.With self test procedures,the model of all lighting ,put the dial switch 1 to 9 up and the lights are lighting.

RGB channel gradient mode , put the dial switch 1 to 9 down, it'schannel gradient mode.

2014 Top Sell DMX decoder,DMX LED Flame Light,led rgb dmx decoder DE8012(OEM Available)

Wiring Diagram

DMX-512Control signal connection

1.DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity.DMX512 controlleroutput signal positive, signal negative, signal groundwithDE8012input interface corresponding connection.

2.DMX5000 each interface can with not more than 170pieces ofDE8012. Through the JBLED FLASH light making software and can with computer on line control. Realize infinite contact the DMX lights.

3.When connecting32pieces ofDE8012, DMX signal must add a signal amplifier RE2000. Cascade can't more than 4 PCS.

4.At the end of theconnection, we should connect a DMX signal finalizer.(Put down the code switchNO.10of DE8012dial).

Our Service:

1. Professional buying advice according to your needs.

2. Instant response to your inquiries.

3. Short lead-time, quick delivery.

4. Three years warranty for all of our products.

5. Samples orders, OEM/ODM orders are also welcomed.

Thank you for visiting and reading. If you don't find the product or information you need on this page, please feel free to contact us. Our friendly staff will be happy to help.